diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 307f875..d0662b0 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -27,27 +27,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		 sizeof(ddr2_spd_eeprom_t));
 }
 
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-		      unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0)
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		if (ctrl_num == 1)
-			i2c_address = SPD_EEPROM_ADDRESS2;
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are: